click here to visit the European Point-Of-Use Drinking Water Association web site

 
 
 
 

Products - AA range - 4400X series


AA 4400X 'POINT OF USE' WATER COOLER

Building on the success of the AA3300 range, the new AA4400X POU cooler combines proven reliability, functionality and increased hygiene with outstanding design and elegance.

Modern push and hold solenoid buttons avoid the risk of leaving tap running by mistake, and the new HygieneGuard tap covers reduce the risk of contact contamination.

The AA4400X range is available in anthracite with silver livery.

Features:

New HygieneGuard Tap Cover - A silver impregnated plastic tap cover is designed to stop bacterial growth from contact with contamination. The HygieneGuard can be easily replaced.

Cabinet - Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish.

Drip Tray - Lift out design which can be connected to mains drainage. High impact durable plastic. Removable anti splash grid.

Taps - Modern push and hold solenoid taps replace the old fashioned manual taps. The push and hold action prevents leaving the tap running by mistake whilst operating as a safety tap mechanism at the same time. The spouts of the solenoid taps are protected by the new HygieneGuard tap covers. Their silver impregnation is designed to prevent hand to tap bacterial contamination.

Cup Holder - Integrated cup holder with exposed locking nuts to open up for easy refilling of cups.

Removable Lower Panel - Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access.

Filters - POU coolers are often fitted with a 1 micron nominal size carbon block filter which removes the taste and smell of chlorine, a host of of heavy metals/chemicals and some pathogens which are unable to pass through the 1 micron nominal carbon block pore size.

Optional Extras:

AA44SIP4400X model - This model comes with SIP ozonation which automatically sanitises the cooler for five minutes at 2am every 24 hours through a burst of ozone into the water tank and system. SIP ozonation has been thoroughly tested and it has been accepted that it reduces the need for hard sanitisation of coolers by half. SIP ozonation represents a significant advance over UV and other sanitising methods.

Specification:

Refrigeration System - Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. unit hermetically sealed. R-134a refrigerant.

Cooling System - Stainless steel 3 litre cold water tank. Thermostatically controlled to 4C - 12C.

Heating System - Stainless steel 2 litre tank. Thermostatically controlled to between 87 and 92C. Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of the cooler.

Power Supply - 220 volt, 50/60 Hz. Provided with a pin plug and 180 cm power cord. Dimensions (floor standing): height 1135mm, width 340mm, depth 340mm. Dimensions (table top): height 460mm, width 340mm, depth 340mm.

Shipping Weights - (floor standing) 18kg, (table top) 15kg.

Model numbers - WCPC 4400X (floor standing, cook and cold), WCPH 4400X (floor standing, hot and cold), WCPTC 4400X (table top, cook and cold), WCPTH 400X (table top, hot and cold), WCPCSIP 4400X (SIP self sanitisation, floor standing, cook and cold), WCPHSIP 4400X (SIP self sanitisation, floor standing, hot and cold).

 

Water Cooler Dispenser Suppliers - Cool Coolers Ltd, Yorkshire, UK